Filter
Top Products
16
Deinterlace
The ‘deinterlace‘ photo node enables the merging
of two fields of video originated frames. There are no
arguments required.
• For quick comparison between ‘deinterlace’ on/off
toggle key D in the processed view mode. Pushing
down the key will disable the effect on the image and
the color of the icon will change to black & white. For
‘effect on’ release the key.
Sharpen
The ‘sharpen‘ node photo applies a sharpening process
on the image. The details of the sharpening process are
determined either by choosing a predefined kernel file and
following the description of the convolution node (see
chapter 5.5.2.4 of the ARRILASER manual), or by choosing
variable and using the unsharp masking as described in
chapter 4 of the Release Notes CLIF 3.5/ALGUI 3.44. In
this case a filter size and strength must be choosen. Filter
strength is set in percentage and can be varied from 0 to
200. To judge the sharpening effect set the display settings
to 100%. For quick comparison between sharpen on/off
toggle key S in the processed view mode.
Operation
2.2.