ATEN Technology KL1100 Projection Television User Manual


 
Chapter 1. Introduction
3
Requirements
LCD Console
The LCD console supports most KVM switches that have PS/2 console
port connectors. If you are unsure whether your switch is supported or not,
check with your dealer.
The integrated LCD monitor's maximum resolution is 1280 x 1024
@75Hz. Make sure that none of the resolution settings of the connected
computers exceed the LCD monitor's maximum resolution.
External Console
A VGA, SVGA, or MultiSync monitor capable of displaying the highest
resolution provided by any computer in the installation
USB or PS/2 keyboard and mouse
If you install an external console and wish to extend the distance between it and
the KL1100, CS Custom extender cables are available in various lengths.
Contact your dealer for details.
Cables
For optimum signal integrity and to simplify the layout, we strongly
recommend that you use high quality custom cable sets available in varying
lengths, described in the table below, which can be purchased from your dealer.
Length (m) Part Number
1.20 2L-5201P
1.80 2L-5202P
3.00 2L-5203P
6.00 2L-5206P
1.80 2L-5702P
1.20 2L-5201U
1.80 2L-5202U
3.00 2L-5203U
5.00 2L-5205U
kl1100.book Page 3 Friday, October 29, 2010 2:54 PM