Filter
Top Products
11
Chapter 2
Hardware Setup
Before you Begin
1. Important safety information regarding the placement of this
device is provided on page 33. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up has been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.
3. Packing material has been inserted to protect the KL1100 during
shipping. Slide the LCD module out (see Opening the Console,
page 15), until the packing material is visible. Remove the
packing material before installing the unit, as shown in the
diagram below.
kl1100.book Page 11 Friday, October 29, 2010 2:54 PM