Filter
Top Products
KL1100 User Manual
14
Connecting Up
Refer to the example installation diagram as you perform the following steps:
1. Plug the SPHD connector end of a KVM cable (either supplied with the
unit, or purchased separately, see External Console, page 3) into the LCD
Console's KVM port.
2. Plug the keyboard, monitor, and mouse connectors of the KVM cable into
their respective ports on the Console Section of a KVM switch.
3. If you are installing an external console, plug your keyboard, monitor, and
mouse into their respective ports on the Console Section of the LCD
Console. The ports are color coded and marked with an icon for easy
identification.
4. Connect the KL1100 to a power source.
For AC power models, plug the power cord into the LCD Console's
power socket and into a power source.
For DC power models, properly connect the wires from a DC power
source into the DC terminal block.
5. Power up your KVM installation.
6. Turn on the power to LCD Console.
Installation Diagram
2
5
3
4
6
1
kl1100.book Page 14 Friday, October 29, 2010 2:54 PM