Filter
Top Products
Appendix
41
2. Attach the left and right easy-installation mounting rails to the inside of
the rack. The flange that supports the KL1100 will be to the inside.
a) Screw the front flanges to the rack first.
b) Slide the bars with the rear flanges toward the rack until the flanges
make contact with the rack, then screw the rear flanges to the rack.
(Continues on next page.)
Rear Attachment
Sliding Bracket
Support
Flange
Slide Bar
Rear Flange
Front Flange
LEFT
RAIL
RIGHT
RAIL
kl1100.book Page 41 Friday, October 29, 2010 2:54 PM