Filter
Top Products
VS1814T / VS1818T User Manual
18
Reset Commands
Reset the VS1814T / VS1818T to default factory settings using the following
command:
Reset Command [Enter]
The following tables show the possible value for the Control command:
The following table shows the available command list:
Note: The Reset command reverts to the default baud rate, as well as switches
on all output devices.
Verification
After entering a command, a verification message appears at the end of the
command line as follows:
Command OK - indicates that the command is correct and
successfully performed by the device
Command incorrect - indicates that the command has the wrong
format and/or values.
Command Description
reset Resets to factory default settings
Command Enter Description
reset [Enter] Resets the VS1814T /
VS1818T