Filter
Top Products
17
Movin
g
to Another Index
Pla
y
back Control
(
PBC
)
Camera An
g
le
12 Minute Power-Off Dela
y
When a track has more than one index (as indicated on the disc case), you can move to another
index as follows:
Press briefly during play to step forward to the next index.
Press briefly during play to return to the beginning of the current index. Press briefly again
to step back to the previous index.
To go directly to any index, enter the index number using the numerical keys (0-9).
Load a Video CD with PBC and press .
The PBC menu appears on the TV screen. (This will be different for different discs).
Go through the menu with the keys indicated on the TV screen until your chosen passage starts to
play. If a PBC menu consists of a list of titles, you can select a title directly.
Enter your choice with the , or numerical keys (0-9).
Press the to start playback of the title.
Press RETURN to go back to the previous menu.
PBC can be turned off in the setup menu
If the disc contains sequences recorded from different camera angles, the angle icon appears
showing the number of available angles, and the angle being shown. You can change the camera
angle if you wish.
To get another angle, press .
The angle icon will show the next angle.
To go to any angle directly, enter the angle number using the numerical keys (0-9).
To turn off the angle feature, press OSD .
The angle icon disappears.
To turn the angle feature on again, press again.
The angle icon appears.
Your DVD player is designed to stay powered up for 12 minutes after the ignition is shut down.
The user can still watch a movie after the vehicle is turned off, but not long enough to drain the
battery.
The current scene will not be lost due to vehicle shut down. After the 12 minute delay, you can
still eject an already inserted disc, or insert a disc. To insert a disc, simply press EJECT to
“wake-up” the DVD unit and then the DVD will accept the disc.
NOTE: If the number has more than one digit, press the numerical (0-9) keys in rapid
succession.
NOTE: The angle icon remains on the screen unless you turn off the angle feature.