Filter
Top Products
46
Disc Playback Operation
Disc Insertion
Insert a disc into the center of the insertion slot with the label side facing up. The disc will
automatically play after loading.
NOTE:
Do not insert foreign objects into the disc insertion slot. If the mechanism does not
accept the disc, either there already may be a disc in the unit or the unit may need service.
Loading 8 CM disc into the center of the insertion slot
Power/ Mode
The Power/Mode button turns the system ON and OFF. To turn OFF the unit, press and hold the
Power/Mode button for 2 seconds. Each time the Power Mode button is pressed, the source will
change from DVD / RADIO / TV / AV1 / AV2. When there is no disc in the loader, the mode will
automatically switch to Radio mode. The last mode will be memorized when the system is
powered off.
Open/Close
The OPEN button on the unit and the remote control will either open or close the monitor screen.
The monitor will only open when the OPEN button is pressed although the unit power is on. The
monitor will automatically close when the system is powered off.
Eject
In order to eject a disc, press and hold the EJECT button on the unit for 2 seconds. Pressing
and holding the STOP button on the remote control for 2 seconds will also eject the disc.
Play/Pause
The disc will load and playback will begin automatically. Upon insertion, when the Play /Pause
button is pressed a second time the disc play will be paused.
• If a single-sided disc is loaded upside down, the disc will automatically eject after a
few seconds.