Filter
Top Products
14
OSD MENU Description
CAMERA SELECT :
Enable/disable the channel number to display the video
on the surveillance screen.
RECORD SELECT :
Enable/disable the channel number to record video.
i
The channels that are enabled in the camera
select setting can only be set for video
recording.
1 2 3 4
1 2 3 4
QUAD
MPEG4
10
GOOD
ENGLISH
MAIN MENU
CAMERA SELECT
RECORD SELECT
RECORD MODE
VIDEO FORMAT
RECORD FRAMERATE
VIDEO QUALITY
RECORD SCHEDULE
SUBMENU
HARD DRIVE SETUP
SENSOR SETUP
MOTION SETUP
LANGUAGE SETUP
RECORD MODE :
Select D1/CIF recording mode.
Under D1 mode, the video recording is in 720x480 or
720x576 resolution and takes turns from one channel
to the next one. D1 channel is recorded at a maximum
frame rate of 15fps/12fps (NTSC/PAL) for each
channel. User can switch to view the video in single full
screen or QUAD screen.
Whereas in CIF mode, video recording is at a 360x240
or 360x288 resolution, but each video is recorded in
30fps/25fps (NTSC/PAL). User can also view the video
in single full screen or QUAD screen.
VIDEO FORMAT :
The recorded video is in MPEG4 format.
RECORD FRAME RATE :
Set the number of frames per second to be recorded.
Refer to the table below for the available record frame
rate settings. The higher the frame rate, it uses more
hard disk space.
Video Standard
Record Mode
NTSC PAL
EACH 15, 5, 1 12, 5, 1
QUAD 30, 15, 10, 5, 1 25, 12, 5, 1
VIDEO QUALITY :
Select the video quality setting from BEST, GOOD or
NORMAL.
Choosing NORMAL allows you to record more hours
but the quality of the recorded video is moderate. For
more information about the recording time, please visit
our website and look for EB1504 MPEG4.
LANGUAGE SETUP :
Select from the available language.