Filter
Top Products
User’s Manual
7
Using the AVerMedia
AVerTV Box
Using AVerMedia
®
AVerTV Box for the First Time
When you power on the AVerMedia
®
AVerTV Box for the first time, it will
automatically proceed to the Set Area of Setup Menu no. 2. Since TV
signals vary in different countries, you need to select the appropriate signal.
Refer to the table below for country signals.
NTSC-M SECAM-DK SECAM-L PAL -I PAL -BG PAL -DK
USA-STD RUSSIA FRANCE UK HUNGARY POLAND-1
USA-HRC UKRAINE HK EUROPE POLAND-2
USA-IRC ITALY POLAND-3
TAIWAN AUSTRALIA CZECH
JAPAN ZAHAV CHINA
MATAV
GVANIM
IDAN
Each column in the table above corresponds to a different type of TV system.
Only one of these TV systems (only one column) will appear as your Set Area
the first time you power on the AVerTV Box. Make sure that you select the
correct country signal from the menu.
To ensure that you can select and watch all active channels, refer to the section
Channel Presetting on how to automatically scan and memorize all active TV
channels in your area.
Accessing TV Controls
To access the various TV controls, open up the menu displays or press on
the remote control buttons.
The Remote Control
The figure on the next page shows a clear layout of the remote control unit.