Filter
Top Products
About Channels and Stations …
You can store up to a total of 10000 digital TV
channels and digital radio stations. Once you
have tuned in the channels and stations, you
can edit the Channel and Station Lists. This
means that you reduce the time you spend
looking for specific channels and stations by
rearranging the order in which they appear
in the list.
You can make up to ten different Channel
and ten Station Groups containing only the
channels or stations you choose, and you can
name each of these Groups. Each Group can
contain up to 99 channels or stations.
Contents of the CHANNELS and STATIONS
menus …
EDIT
CHANNEL or STATION LIST … Delete inactive
channels or stations from the lists. Note that
active channels or stations are added again by
the broadcaster when information is updated.
View channel or station information.
CHANNEL or STATION GROUPS … Add to or
remove channels or stations from Groups,
rearrange the order of channels and stations,
and name your Groups.
SEARCH
In the SEARCH menu, you set your preferences for
a channel or station search:
POSITIONS … Select which position (terrestrial or
satellite) you wish to search from, hide* or
show positions in the list or edit position
information– Use the “edit” function to change
the settings for a chosen position. For example
you can choose to switch the active antenna on
or off (terrestrial) or which DiSEqC switch to use
(satellite) and you can choose a test channel.
The test channel shows images if the setup is
correct.
SEARCH FILTER … Select whether to search for all
channels or free-to-air channels only.
SEARCH MODE … Select either automatic or
manual search.
FREQUENCY … If you have chosen manual search,
you can enter a search frequency.
SYMBOL RATE … If you have chosen manual
search, you can set a symbol rate value.
NETWORK SEARCH … If you have chosen manual
search, you can search for all channels and
stations found in a specific network by choosing
‘YES’.
SIGNAL INFORMATION
In the SIGNAL INFORMATION menu you can see
various information about the signal received from
the provider:
POSITION … See the chosen position
FREQUENCY … See the chosen frequency
NETWORK … See the chosen network
SYMBOL RATE … See the chosen symbol rate
SERVICE ID … See the channel ID.
SIGNAL QUALITY … Shows the quality of the
received signal.
SIGNAL STRENGTH … Shows the strength of the
received signal.
In the CHANNEL or STATION LISTS, the coloured
buttons offer you several options. For example
you can sort you channels or stations
alphabetically or by channel or station number
using the ‘123/abc’ function. The default setting
for viewing channels or stations in the Lists is by
channel or station numbers. You can view
information for each channel.
*If you hide a position in use, all channels and
stations received from this position will disappear
from your channels and stations lists and your
groups. However, if you start a search in a
position, you have previously hidden, the position
is made available automatically.
>> SETUP menu
10