Filter
Top Products
When your television is equipped
with the DVB–T/S Module, you can
receive digital satellite and terrestrial
programmes.
The Beo4 remote control gives you
access to all functions of your
television. However, only the
functions relevant to the module are
explained here, for further
information about operating your
television, refer to the televisions own
Guide.
Switch on your television and activate the DVB–T/S
module
Select channel or station numbers or menus, or
enter numbers in menus
Bring up teletext, if provided by the channel you
are currently watching
Bring up the DVB–T/S menu overlay as described
on the next page. Press twice to bring up the TV
menu
Step between channels or stations or move cursor
up or down in menus
Move cursor left or right or see available options
in menus. While DTV is selected as source, you
can use the buttons to step between your
Channel/Station Groups and the Channel/Station
Lists
Select and activate a function or confirm a choice
in a menu. Press and hold while watching
television via the DVB–T/S module to bring up a
Channel/Station List
Back up through menus
Exit menus or, for example, teletext
The coloured buttons are used as “short cuts” to
functions as described on the next page, or used
as indicated in the DVB–T/S menus
Daily use
TV LIGHT RADIO
DTV DVD CD
V MEM RECORD A MEM
7 8 9
4 5 6
TEXT
0
MENU
1 2 3
LIST EXIT
STOP
GO
DTV
0 – 9
TEXT
MENU
GO
STOP
EXIT
4
The Beo4 display shows the source you have
selected, or extra functions available when you
press the LIST button.
NOTE! Depending on your Beo4 version, the ‘DTV’
button may be named ‘SAT’ instead. These
buttons have the same function.