Barco PGWU-61B Projection Television User Manual


 
29
PGXG-61B/PGWX-61B/PGWU-61B - - 2015/04/01
4. User Controls
4.1.2.1 Input Menu
Input Select
Select the active source, include the following options:
HDMI y DVI y VGA y
5BNC y Video y
Auto Power Off
Switch off after a while when no sync detected.
Off: Default value. Disable auto power off function. y
On: Projector will switch off automatically when no signal for 20 minutes. y
Auto Power On
The projector turns on automatically when switch on projector after connecting power.
Off: Default value. The projector stays off when AC power is applied. The user must power on the projector. y
On: The projector turns on automatically when switch on projector after connecting power. y
No Signal
Select what image displayed when no signal.
Logo: Default value. Search screen is the factory logo picture. y
Blue: Search screen is solid blue (RGB=0,0,255). y
Black: Search screen is solid black (RGB=0,0,0). y
White: Search screen is solid white (RGB=255,255,255). y
A Image Adjust
Select the mode of the auto image menu.
Always: Default value. Always execute the function of image\Auto image even if the timing is the same as previ- y
ous source.
Off: Never execute the function of image\Auto image. y
Auto: Execute the function of image\Auto image when you get a different timing then previous source. y
3D Mode
Select the 3D mode
Off: Default value. y
On: Set “On” to turn 3D settings on for 3D images. Compatible 3D source, 3D content and active shutter y
glasses are required for 3D viewing.
3D Invert (off & on)
Off: Default value. y
On: Set 3D invert “On” to invert left and right frame contents. y
Input
Input Select Enter
Auto Power Off On
Auto Power On Off
No Signal Logo
A Image Adjust Always
3D Mode Off
3D Invert Off