Filter
Top Products
Server Properties Configuration
40 Chapter 5 Manual Documentation Number: ESP901-902_0508m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
After that port has been updated you may want to re-enter Server
Properties to verify the changes have taken effect, or to view/change
the configuration of other ports. Each port must be configured
separately.
Saving Configuration Data in Console Mode or Telnet
Saving (updating) server properties is done from the Configuration
screen. Access the
Configuration screen by tabbing through the list of
screens on the left side of the window and highlighting
Configuration.
There are four options shown on the right side of the
Configuration
screen: Save, Default, Running and Reset. Use Tab, Backspace, or
arrow keys to move the cursor to the option position, then press Enter.
•
Console Mode and Telnet Configuration Screens
• Save stores the configuration data to the
Serial Server flash
memory and resets it.
• Default restores the configuration data to factory default settings.
• Running restores the configuration data to the last values stored in
the flash memory.
• Reset re-boots the
Serial Server, making it available for a client
connection.