Filter
Top Products
21
7.2.9.7-Panorama
This setting will enlarge the image to fit the
screen by stretching the image horizontally
while holding the correct proportions at the
centre of the image. Some distortion may
occur.
7.2.9.6-Subtitle
If the subtitles are transmitted in the “16:9
formatted” broadcast, then this setting will
push the picture upwards in order to ensure
the entire written text to be seen.
7.3.1-Timer
Your television is equipped with the feature
of being able to be turned off and on at
periods that you specify. Select TIMER by
pressing the Up/Down movement buttons
and press the OK button in order to have
your TV turned off at the end of a desired
period. The Timer menu will be displayed.
TIMER
CHANGE
BACK
CLOCK 13 : 04
ON TIME - - : - -
OFF TIME - - : - -
ON TIMER LİST DIGITAL
SOURCE P001
FEATURES
SELECT
BACK
TIMER
CHILD LOCK OFF
ACTIVE ANTENNA OFF
AUTO SCART ON
DIGITAL FEATURES
Note: Since the use of certain functions
in order to change the picture sizes for
collective projection or commercial purposes
(modifying the height and width etc.) will
be deemed an infringement of the picture’s
copyright, legal proceedings can be carried
out as required under relevant laws.
7.3-Features Menu Settings
Press the MENU button on your
remote control. Select FEATURES
tab by pressing the Up/Down
movement buttons and press the
OK button. The Features menu will
be displayed.
You can select the titles for which you would
like to perform an operation in Features
menu by using the Up/Down movement
buttons.
Time data is obtained from Teletext; if no time
data is available then select TIME with the
up/down movement buttons and enter the
current time with numeric buttons. Select the
ON TIME and OFF TIME for television in the
same manner and specify the time. Enter the
program number you desire or the external
source with the AV button into SOURCE
tab to specify the channel or source from
which you would like the TV to be turned-on
to. At the end of the time you specified, your
television will automatically switch to stand-by.
If the on time for TV is specified in the Menu,
the TV will switch to the selected program or
to the external source at that time; if the TV is
in standby mode, then it will be turned on with
the selected channel or external source.
7.3.2-ChildLock
If this feature is turned On, the program
currently being watched becomes locked,
the image and sound goes off and the locked
symbol appears on the upper left corner of the
screen. The locked channel is skipped when
you channel search with PR+, PR- buttons.
Note: Child lock feature is for Analog mode
only. Child lock tab does not appear in the
menu in Digital mode.
7.3.3-Active Antenna
When switched ON in the menu it will provide
5V DC via the aerial socket and can be used
to supply aerials with mast head amplifiers
included that require a DC supply.