Filter
Top Products
28
9.7.1-PC Connection:
Connect the D-Sub15 connector to the PC-IN socket at the back of your television
by using an appropriate cable (not supplied with your television). Again, by using
an appropriate cable, connect the audio output of your PC to the PC AUDIO-IN at
the back of your television to listen to sounds from your PC and you can adjust the
volume level of your source by using VOL+/VOL- buttons.
9.7.2-Switching to the PC mode
For your LCD-TV to switch to the monitor (PC) mode, press the AV button on your
remote control. SOURCE menu will be displayed. Select PC option by pressing the
Up/down movement buttons and press the OK button.
9.7.3-PC Setting
Enter into the Setup menu from the main menu by pressing the MENU button in
the PC mode. In order to make the necessary settings in this menu, you can select
the tabs with the up/down buttons on your remote control to make the following
relevant settings.
9.7.4-AUTOCONFIGURATION
The most suitable geometric settings in accordance with the entry mode are
configured by this function. For this operation, just select the Autoconfiguration
tab and press OK button.
9.7.5-HORIZONTAL POSITION: Horizontal position setting.
9.7.6-VERTICAL POSITION: Vertical position setting.
9.7.7-CLOCK FREQUENCY: This is the pixel clock frequency. User can narrow
down or enlarge the display by selecting a desired value.
9.7.8-PHASE: Using the right/left movement buttons, you can ensure that the
colours and shapes are exactly consolidated on the PC image.
9.7.9-PICTURE FORMAT
You can select the PC image to be displayed in 16:9 or 4:3 formats.
9.7-PC VGA connection
Rear view of TV
Picture connection
Sound connection