Filter
Top Products
Using the projector 31
Keystone (0)
Corrects any keystoning of the image. Refer to "Correcting keystone" on
page 24 for more information.
Color Temp
(depends on
the selected
Application
mode)
There are 4 color temperature* settings available.
This value will be reset if you subsequently select an Application
mode
1. T1: With the highest color temperature, T1 makes the image appear
the most bluish white than other settings.
2. T2: Makes images appear bluish white.
3. T3: Maintains normal colorings for white.
4. T4: Makes images appear reddish white.
*About color temperatures:
There are many different shades that are considered to be “white” for
various purposes. One of the common methods of representing white
color is known as the “color temperature”. A white color with a low color
temperature appears to be reddish white. A white color with a high color
temperature appears to have more blue in it.
Brightness
(depends on
the selected
Application
mode)
Adjusts the brightness of the image. The higher the value, the brighter the
image. And lower the value, the darker the image. Adjust this control so
the black areas of the image appear as black and that detail in the dark
areas is visible.
Contrast
(depends on
the selected
Application
mode)
Adjusts the degree of difference between dark and light in the image. The
higher the value, the greater the contrast. Use this to set the peak white
level after you have previously adjusted the Brightness setting to suit your
selected input and viewing environment.
Color
(depends on
the selected
input source)
Increases or decreases the color intensity of the image.
Tint (50)
Adjusts the color tones of the image. The higher the value, the more
greenish the image becomes. The lower the value, the more reddish the
image becomes.
When a Video or S-Video signal is connected, the function is only
available with NTSC system selected.
50
-30
+70
-30
50
+70