BenQ MX819ST CRT Television User Manual


 
Connection 17
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the projector (see "Shipping
contents" on page 8). They are commercially available from electronics stores.
The connection illustrations below are for reference only. The rear connecting jacks available on the
projector vary with each projector model.
Many notebooks do not turn on their external video ports when connected to a projector. Usually a key
combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/
LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key
simultaneously. Refer to your notebook's documentation to find your notebook's key combination.
The D-Sub output only works when an appropriate D-Sub input is made to the COMPUTER-1 jack.
1. VGA cable
2. VGA to DVI-A cable
3. USB cable
4. HDMI cable
5. Component Video to VGA (D-Sub)
adapter cable
6. Audio L/R cable
7. S-Video cable
8. Video cable
9. Audio cable
9
9
9
1
2
1
3
645
7 8
Notebook or desktop computer
Speakers
or
A/V device
Monitor
(DVI)
(VGA)
or