Filter
Top Products
Operation 43
Function Description
Operation
Settings
Direct Power On
Allows the projector to turn on automatically once the power is fed
through the power cord.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER or ON when the projector is in standby mode and the
signal is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 48 for details.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 30 seconds.
This function is only available when Instant Restart is off.
Instant Restart
Selecting On enables you to restart the projector immediately within
90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image" on
page 33 for details.
Sleep Timer
Sets the auto-shutdown timer.
Remote
Receiver
Allows you to enable all the remote receivers or one specific remote
receiver on the projector.
Panel Key
Lock
Disables or enables all panel key functions except POWER on the
projector and keys on the remote control. See "Locking control keys"
on page 33 for details.
Background
Color
Sets the background color for the projector.
Splash
Screen
Allows you to select which logo screen will display during projector
start-up.
4. SYSTEM SETUP: Basic menu