BenQ MX819ST CRT Television User Manual


 
Operation 45
Function Description
Standby
Settings
Network
Selecting On enables the function. The projector is able to provide the
network function when it is in standby mode.
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER-1 jack is
correctly connected to devices. See "Connection" on page 17 for how
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press / to
choose the source that you wish to use. See "Connection" on page 17
for how to make the connection.
Enabling this function slightly increases the standby power consumption.
Network
Settings
Wired LAN
See BenQ Network Projector Operation Guide for details.
AMX Device Discovery
When AMX Device Discovery is On, the projector can be detected
by AMX controller.
MAC Address
Displays the mac address of this projector.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Phase, H. Size, User 1,
User 2, Reference Mode, Color Space Conversion, Language,
Projector Installation, High Altitude Mode, Security Settings,
Network Settings and Baud Rate.
5. SYSTEM SETUP: Advanced menu