BenQ MX819ST CRT Television User Manual


 
Operation 39
Note that the menu items are available when the projector detects at least one valid signal.
If there is no equipment connected to the projector or no signal detected, limited menu
items are accessible.
Main menu Sub-menu Options
5.
SYSTEM
SETUP:
Advanced
High Altitude
Mode
On/Off
Audio Settings
Mute On/Off
Volume
Power On/Off
Ring Tone
On/Off
Lamp Settings
Lamp Mode
Normal/Economic/SmartEco
ImageCare/SmartEco LampCare
Reset Lamp Timer
Equivalent Lamp
Security
Settings
Change Password
Change Security
Settings
Power On Lock
Baud Rate
2400/4800/9600/14400/19200/
38400/57600/115200
Test Pattern On/Off
Closed Caption
Closed Caption
Enable
On/Off
Caption Version CC1/CC2/CC3/CC4
Standby
Settings
Network On/Off
Monitor Out On/Off
Audio Pass
Through
Off/Audio in 1/Audio in 2/Audio L/
R/HDMI
Network
Settings
Wired LAN
Status
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
AMX Device
Discovery
On/Off
MAC Address
Reset All Settings
6.
INFORMA
TION
Current System Status
• Source
• Picture Mode
• Lamp Mode
• Resolution
• 3D Format
• Color System
• Equivalent Lamp
• Firmware Version