Filter
Top Products
AC211A-R2 & AC216A-R2
PAGE 13
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION
4-1. INTRODUCTION
The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the device.
• The CONTROL MODE allows selecting and adjusting the parameters of the device.
4-2. CONTROL BUTTONS
The front panel display is controlled by 1 button and 1 knob:
knob: • In the CONTROL MODE, turn this knob to scroll thru the different menus.
ENTER button: • From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
4-3. STATUS MODE
When switching ON, the front panel display shows the product's name and firmware versions as follows:
DEVICE MODEL AC216A-R2 DEVICE STATUS
DEVICE VERSION Version _._
In : #1 / NTSC c INPUT STATUS
Out : intern / 60 Hz d
In : #1 / NTSC OUTPUT STATUS
Out : 1280x1024 e
c INPUT NUMBER / INPUT STANDARD
d OUTPUT RATE MODE / OUTPUT FRAME RATE.
e OUTPUT RESOLUTION.