Filter
Top Products
AC211A-R2 & AC216A-R2 Chapter 1 : INTRODUCTION (continued)
PAGE 9
1-8. AC216A-R2 PLUS FRONT PANEL DESCRIPTION
LCD CONTROL
ENTER: Validates a selected item.
A long push on this button allows to activate the STANDBY mode. A short push on a front
panel push button allows to wake up the device.
Allows to scroll thru the different menus (in Control mode).
FREEZE: A short push allows to freeze the displayed output.
INPUT SELECTION: Selection of the 3 input sources.
C.VIDEO 1: Composite source #1 selection (Input #1).
C.VIDEO 2: Composite source #2 selection (Input #2).
RGB/YUV: RGBS & YUV source selection (Input #3).
S.VIDEO: S.VIDEO source selection (Input #4).
COMPUTER: Computer source selection (Input #5).
NOTE:
A long push (2 seconds) on the selected input button allows to active the BLACK function. A black screen
is displayed onto the output. A short push on an INPUT SELECTION button allows to inactive this
function.
1-9. AC216A-R2 PLUS REAR PANEL DESCRIPTION
I
P
/
L
A
N
ON / OFF: AC power switch (O = OFF, I = ON).
POWER: Standard IEC connector (100-250 VAC, 1A, 50-60Hz automatic).
AUDIO IN & OUT
1, 2, 3, 4 & 5: Audio stereo inputs on MCO connectors.
L: Left, R = Right.
OUT: Audio stereo output on a MCO connector.
INPUT SOURCES
1-C.V: Composite Video input #1 on a BNC female connector.
2-C.V: Composite Video input #2 on a BNC female connector.
3-RGB/YUV: RGBS & YUV (Y, Cr, Cb) video input on 4xBNC female connectors.
4-S.VIDEO: S.VIDEO (Y/C) input on 4-pin mini DIN female connector.
5-COMPUTER: Computer input on a HD15 female connector.
RS-232: RS-232 communication port on a DB9 female connector.
DISPLAY OUTPUTS
ANALOG: Analog computer output (RGBHV, RGBS or RGsB) on a HD15 female connector.
DVI-I: Digital & analog computer output on a DVI-I female connector.