Filter
Top Products
Chapter 1 : INTRODUCTION (continued) AC211A-R2 & AC216A-R2
PAGE 8
1-6. AC211A-R2 FRONT PANEL DESCRIPTION
LCD CONTROL
ENTER: Validates a selected item.
A long push on this button allows to activate the STANDBY mode. A short push on a front
panel push button allows to wake up the device.
Allows to scroll thru the different menus (in Control mode).
FREEZE: A short push allows to freeze the displayed output.
INPUT SELECTION: Selection of the 3 input sources.
C.V: Composite source #1 selection (Input #1).
Y/C - C.V: S.VIDEO source or Composite source #2 selection (Input #2).
COMPUTER: Computer source selection (Input #3).
NOTE:
A long push (2 seconds) on the selected input button allows to active the BLACK function. A black screen
is displayed onto the output. A short push on an INPUT SELECTION button allows to inactive this
function.
1-7. AC211A-R2 REAR PANEL DESCRIPTION
AUDIO:
1, 2 & 3: Audio stereo input 1, 2 & 3 on MCO connectors.
L: Left, R = Right.
OUT: Audio stereo output on a MCO connector.
VIDEO & COMPUTER INPUTS:
1 C.V: Composite Video input #1 on a BNC female connector.
2 C.V: Composite Video input #2 on 2xRCA female connectors.
Y/C: S.VIDEO (Y/C) input on 2xRCA female connectors or a 4-pin mini DIN female connector.
3 COMPUTER: Computer input on a HD15 female connector.
DISPLAY OUTPUT: DATA output (RGBHV, RGBS or RGsB) on a HD15 female connector.
RS-232: RS-232 communication port on a DB9 female connector.
+5 Vdc: DC input connector.