Filter
Top Products
Page 14
724-746-5500 | blackbox.com
AVSW-HDMI2X1A
Chapter 3: Installation
3. Installation
• Before installation, power off all devices that will be connected to this system.
• Make sure that all devices you will connect are properly grounded.
• Place cables away from fluorescent lights, air conditioners, and machines that
are likely to generate electrical noise.
NOTE: If you encounter no screen display after connecting a device:
1. Make sure the device cables are correctly and firmly attached.
2. Set your display device’s input source as HDMI.
3. Check the PC BIOS configuration for the video output settings.
4. Connect your computer to the display DIRECTLY to check if the video signal can
get through.
3.1 Connection Pattern
Figure 3-1 shows a typical connection of the 4-Port Video Switch with audio
(AVSW-HDMI4X1A).
Serial
cable
Figure 3-1. 4-Port Video Switch (AVSW-HDMI4X1A).
Figure 3-2 shows a typical connection of the 4-Port Video Switch
(AVSW-HDMI4X1).