Filter
Top Products
9
English
Choosing connection types for your A/V devices
1. Look at the rear panel of each A/V device to determine what type of video output connectors it has.
2. In the following table, choose the type of available video connector that provides the highest possible video
quality. We recommend using an HDMI connection if it is available. Place a check mark in the table for the
connector type used for each of your A/V devices.
Connecting your A/V devices to the VS-2
1. Plug one end of the video cable into the appropriate video output connector(s) on your A/V device.
2. Plug the other end of the video cable into the appropriate Video INPUT connector(s) on the VS-2.
3. Refer to your LIFESTYLE
®
system installation guide for information on making audio connections.
Video
Quality
Video
Connector VCR CBL•SAT
AUX
(Other)
Best HDMI
Not
available
on VS-2
Better Component
Good S-Video
Standard Composite
VS-2
DO NOT USE
If any of your A/V devices do not have an HDMI connector, you can use any other
type of connection. Remember, the VS-2 converts these up to HDMI format.
00_LasikOG.book Page 9 Thursday, October 26, 2006 1:23 PM