Filter
Top Products
10
4. Repeat steps above to assign another favourite
channel.
5. If the LED ashes one long blink, the entry
failed and must be repeated.
ADVANCED FUNCTIONS
Most users won’t need to perform any of the set-up
procedures in this section.
Volume Control Settings
Volume control functions are defaulted to the TV that
the remote is set to control. The volume control setting
can be changed by following these instructions.
1. In CHILD or ADULT mode, hold down both
MUTE and ON/OFF for three seconds, until
the LED blinks twice.
2. Enter
9 9 3 and press VOL - to lock volume
control to the Set Top Unit (STU).
Or
3. Enter
9 9 3 and press VOL+ to lock volume
control to the TV.
Channel Control Settings
Volume control functions are defaulted to the STU. The
channel control setting can be changed to be through the
TV by following these instructions.
1. While in CHILD or ADULT mode, hold down
both MUTE and ON/OFF for three seconds,
until the LED blinks twice.
2. Enter
9 7 3 and press VOL+ to lock volume
control to the TV
Or
3. Enter 9 7 3 and press VOL - to lock volume
control to STU.
POWER CONTROL SETTINGS
The ON/OFF key has a default setting to control power
on both the STU and TV each time it is pressed. Power
control can be changed by following these steps:
1. In CHILD or ADULT mode, hold down both MUTE and
ON/OFF for three seconds, until the LED blinks twice.
2. Enter 9 9 5
3. Press POWER
4. Press one of the following options:
• (0) to set ON/OFF to control STU and TV Power, STU rst
• (1) to set
ON/OFF to control TV and STU Power, TV rst
• (2) to set ON/OFF to control STU power only
• (3) to set ON/OFF to control TV power only
5. Press and hold
MUTE until the LED blinks two times.