Filter
Top Products
4
Step 3: Set TV Control (Optional)
1. With your television ON, and the remote in
Programming mode, press the VOL + key.
The LED blinks twice.
2. Refer to the TV codes in the back of this
manual. Find your TV brand and enter the rst
code for that brand by using the number keys
on the remote. When you press the fourth
number key, the LED on the remote blinks twice
to conrm a valid code.
To test the new TV code:
3. Slide the switch on the back of the remote to
CHILD mode.
4. Point the remote at the TV and press
MUTE.
If the TV is muted, the code is correct. If the TV
does not mute, you must try the next code for
your brand.
5. Set the switch back to P for programming.
6. If MUTE did not work, repeat the SET TV
Control process until the TV responds to
MUTE.
NOTE: The remote must be in CHILD or ADULT
mode to test the code.
7. TV control can also be set by using a simple
code search as shown on page 9.
Step 4: Programming the STAR and MOON
buttons (optional)
MiniMote comes pre-programmed with 8 favourite kids
channels assigned to keys 3 through 0. Two additional
favourite channels can be added to the STAR(1) and
MOON(2) keys on the remote.
1. While in Programming mode, press and hold
the
STAR(1) button. Release the key when
the LED blinks twice.
2. Press the digits for the channel number for the
favourite channel that you wish to save to the
STAR(1) button.
3-position switch
child
P
adult
3-position switch
child
P
adult