Filter
Top Products
5
3. Press and hold the STAR(1) button until
the LED blinks twice. STAR(1) now is
programmed to the channel that you have
assigned.
4. Repeat steps above to assign a favourite
channel to the MOON(2) button.
Step 5: Set the remote to CHILD mode
Set the switch located in the battery
compartment to the left position to enter
CHILD user mode. CHILD mode is for children
and limits them to only have access to the ten
programmed channels on the remote.
Step 6: Replace battery door
Secure the battery compartment door back
in place with a screwdriver using the screw
provided.
Your MiniMote remote is now ready for use!
Refer to this manual for additional features and functions.
CUSTOMISING THE IMAGE COMPARTMENT
MiniMote comes with a customisable image compartment.
This allows the remote to be customised for the child or
children using the remote. A photo or image of your child’s
favourite character can be inserted in this location.
To replace default image
1. Using a coin or at screwdriver,
gently pry off the plastic lens
3-position switch
child
P
adult