Filter
Top Products
E-45
3
Make any of the following settings if you want.
• Tone number (page E-19)
• If you are not confident about playing at a fast tempo,
try using a slower tempo setting (page E-35).
4
Press the START/STOP button to start real-time
recording to Track 2 along with playback from
Track 1.
5
Listening to the playback from Track 1, play what
you want to record to Track 2 on the keyboard.
6
Press the START/STOP button to end recording
when you are finished playing.
• If you make a mistake while recording, stop the record
operation and begin over again from step 1.
NOTE
• Track 2 is a melody-only track, so chords cannot be
recorded there. Because of this, the entire keyboard is
a melody keyboard, regardless of the MODE switch
setting.
To record to Track 2 without playing
back Track 1
1
Use the SONG MEMORY button to enter record
standby.
2
Press the TRACK 1 button to turn off playback of
Track 1.
3
Continue from step 1 under “To record to Track 2
while playing back Track 1”.
• Note that the above procedure does not turn off
rhythm and Auto Accompaniment.
Track 2 Contents After Real-time
Recording
The following data is recorded to Track 2 during real-time
recording.
• Tone number
• Pedal operations
Deleting the Contents of a Specific
Track
Use the following procedure to delete all of the data currently
recorded in a specific track.
To delete all of the data in a specific
track
1
Use the SONG MEMORY button to enter record
standby, and then use [+] and [–] to select the song
(0 or 1) whose track you want to delete.
2
Hold down the SONG MEMORY button until the
track delete screen appears on the display.
3
Use the TRACK 1 or TRACK 2 button to select the
track whose data you want to delete.
Example: To select Track 1
4
Press the [+] button.
• This deletes the selected track and enters song
memory playback standby.
NOTE
• The track delete screen is cleared from the display
automatically if you leave the keyboard with the track
delete message on the display for about five seconds
without doing anything.
• Once you select a track in step 3, you cannot change to
a different track without quitting the track delete operation
and starting again.
• You cannot select a track for deletion if that track does
not contain any data.
• Pressing the SONG MEMORY button while the track
delete screen is on the display returns to record standby.
Re c
o..
N
Tr .
l.?D
e
Song Memory Function
642A-E-047A
Tr .De ?l
.
Flash
LK55_e_41-45.p65 03.10.7, 5:30 PM45