CAVS 105G DVD Player User Manual


 
When all the audio/video connections have been made,
connect the AC power plug first to the player and then to
the wall outlet. Make sure that the plugs are inserted
firmly.
Open the compartment cover, and place the two supplied
R6(SUM-3)/AA(15F) batteries in the remote control unit
according to the polarity marking("+" and "-") inside the
compartment. Then replace the cover.
The batteries will last about six months with normal use.
If the functions of the remote control unit become erratic,
replace the batteries.
Point the top of the remote control unit toward the remote
sensor as directly as possible. If you operate it from a
diagonal position, the operating range(approx. 5 m) may be
shorter.
Remote sensor
* Disconnect the power cord:
* Do not:
if you are not going to use the player for a long time.
before cleaning the player.
before moving the player.
connect or disconnect the power cord with wet hands.
pull the power cord when disconnecting it, as this may
damage the cord and cause fire, electric shock, or other
accidents.
Warning
Caution
Do not alter, twist or pull the power cord, or put anything
heavy on it, which may cause fire, electric shock, or
other accidents.
If the cord is damaged, consult a dealer and have the
power cord replaced with a new one.
Precautions of the safe use of batteries
Observe the following precautions for the safe use of
batteries. If they are used improperly their lives will be
shortened, they may burst or their contents may leak.
Remove the batteries from the remote control unit if it
is not going to be used for a long period of time.
Remove dead batteries and dispose of them properly.
Never leave dead batteries lying around, take them
apart, mix them with other refuse, or throw them into
an incinerator.
Never touch liquid that has leaked out of a battery.
Do not mix new and old batteries, or batteries of
different types, when replacing them.
6
Preparations
Using the remote control unitUsing the remote control unit
Connecting the power cord Remote sensor
To install batteries