Filter
Top Products
Joining Each MVP™ (Creating a Modular Design)
-10- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
Use the following instructions to join your panels vertically. Each step corresponds to the
number in the diagram.
1. When connecting two (2) panels, pull out the vertical rigging latch making sure it is
pushed outward.
2. The fast locks on the lower panel should be pointing up.
3. Align the top and bottom panels exactly on top of each other. Push the vertical rigging
inward to fasten.
Once the panels are fastened, make sure you turn the vertical rigging latch toward
the center of the panel to lock the panels in place.