Chauvet 18 VCR User Manual


 
Typical MVP™ Installation
MVP(12/18/37.5) Series Getting Started User Manual, Rev. 10 -17-
7. Typical MVP™ Installation
Because a video wall system can include different components to provide a simple to complex modular wall design, use
the following steps as a general guide to get started.
Step 1
Open and examine the MVP™ flight case to make sure you have received all products and
accessories and that each one is in good condition.
Step 2
Apply power and run the self-test for each MVP™ to ensure all LEDs and inside
connections in each panel are working (optional).
Step 3
Create a stable mounting surface (i.e., truss or other stable surface) for MVP™ mounting.
Step 4
Mount the first top row of the MVPs. Refer to the Mounting section in this User Manual.
Step 5
Based on your video wall configuration (design), join each panel, either horizontally or
vertically, using the instructions in the section, Joining Each MVP™.
Step 6
Connect the signal source to the MVPDriver. Connect the MVPDriver to the MVP
Signal Distributor (if applicable).
Step 7
Connect either MVP™ Driver or MVPSignal Distributor (if being used) to the Input
Signal socket of the first panel in your connection chain.
Refer to the instructions and information in the section of this User Manual, Connecting
(Cabling) Each MVP™.