Filter
Top Products
Page 3SKU 66508 For technical questions, please call 1-800-444-3353
eliminates the need for the three wire
grounded power cord and grounded
power supply system.
Do not abuse the Power Cord. 5. Never
use the Power Cord to carry the tools
or pull the Plug from an outlet. Keep
the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace
damaged Power Cords immediately.
Damaged Power Cords increase the
risk of electric shock.
When operating a power tool out-6.
side, use an outdoor extension cord
marked “W-A” or “W”. These exten-
sion cords are rated for outdoor use,
and reduce the risk of electric shock.
Personal Safety
Stay alert. 1. Watch what you are doing,
and use common sense when operat-
ing a power tool. Do not use a power
tool while tired or under the inuence
of drugs, alcohol, or medication. A
moment of inattention while operating
power tools may result in serious per-
sonal injury.
Dress properly. 2. Do not wear loose
clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves
away from moving parts. Loose
clothes, jewelry, or long hair can be
caught in moving parts.
Avoid accidental starting. 3. Be sure
the Power Switch is off before plugging
in. Carrying power tools with your n-
ger on the Power Switch, or plugging
in power tools with the Power Switch
on, invites accidents.
Remove adjusting keys or wrenches 4.
before turning the power tool on. A
wrench or a key that is left attached to
a rotating part of the power tool may
result in personal injury.
Do not overreach. 5. Keep proper foot-
ing and balance at all times. Proper
footing and balance enables better
control of the power tool in unexpected
situations.
Use safety equipment. 6. Always wear
eye protection. Dust mask, nonskid
safety shoes, hard hat, or hearing pro-
tection must be used for appropriate
conditions.
Tool Use and Care
Do not force the tool. 1. Use the correct
tool for your application. The correct
tool will do the job better and safer at
the rate for which it is designed.
Do not use the power tool if the 2.
Power Switch does not turn it on or
off. Any tool that cannot be controlled
with the Power Switch is dangerous
and must be replaced.
Disconnect the Power Cord Plug 3.
from the power source before mak-
ing any adjustments, changing ac-
cessories, or storing the tool. Such
preventive safety measures reduce the
risk of starting the tool accidentally.
Store idle tools out of reach of chil-4.
dren and other untrained persons.
Tools are dangerous in the hands of
untrained users.
Check for misalignment or binding 5.
of moving parts, breakage of parts,
and any other condition that may af-
fect the tool’s operation. If damaged,
have the tool serviced before using.
Many accidents are caused by poorly
maintained tools.
Use only accessories that are rec-6.
ommended by the manufacturer for
your model. Accessories that may be
suitable for one tool may become haz-
ardous when used on another tool.