Filter
Top Products
9
Installation Instructions MSP-DCCLCDS
DISPLAY REMOVAL INSTRUCTIONS
To perform service on the display, remove the display
from the wall plate as follows:
WARNING: Disconnect power and audio/video cables
before removing the display from its wall
mount.
1. If applicable, remove the self tapping screws (70) and/or
padlocks from both sides of the wall plate. This hard-
ware provides security (see Figure 10).
2. Slide the security latches out on both sides to disengage
the display from the wall plate. See Figure 11.
WARNING: The plasma display is heavy and extremely
fragile. Exercise caution when removing the
display from the mount to avoid equipment
damage or personal injury.
3. With an assistant, lift the display up and off the wall
plate (see Figure 11) to remove the display from the
wall.
Figure 10. Remove Security Hardware
Figure 11. Remove Display