Filter
Top Products
74
VRX766VD
English
INSTALLATION AND WIRE
CONNECTION MANUAL
Connecting the Accessories
●Connection to the external amplifier
The external amplifier can be connected unless the 5.1ch Surround Decoder is connected. For
detailed information, refer to the instruction manual of the 5.1ch Surround Decoder.
●Connection to the CCD camera for vehicle
The CCD camera for vehicle can be connected to CCD terminal on the TV tuner. For detailed
information, refer to the instruction sheet or manual for the CCD camera.
Note:
• A power supply box (sold separately) is required for connection of the main unit and the CCD camera.
• The power supply box for the camera CAA147 cannot be used. Please use the CAA188 instead.
●If the specified lead of the cellular phone is connected to the phone mute lead of the source
unit, the audio mute is available when the cellular phone is used.
●TV Tuner
When the TV tuner is to be connected, connect the CeNET connector and RCA PIN (yellow). For
detailed information, refer to the instruction manual of the TV tuner.
●DVD Changer
To connect the TV tuner and the DVD changer simultaneously, use a commercial video selector
purchasing separately.
●iPod
When you connect the iPod with video features by using the connector cable CCA-670-600, the video
data stored in the iPod cannot be displayed on the liquid crystal panel of this unit.
Use the Clarion’s new connector cable which is released soon.
280QC6823KA_00.0_EN.book Page 74 Monday, February 27, 2006 9:22 AM