Filter
Top Products
UCommand-616 Universal Remote Control User’s Manual
6 Identifying components
1. LCD
The LCD display allows you to configure and operate your
devices by touching the screen to select the function you
want. Push any hard button to power on the UCommand-
616. Refer to The LCD on page 12 for a description of the
functions in this display.
2. Off button
At the Main Menu display, press this button to turn the
UCommand-616 off. When a Device menu is displayed, this
button functions as a power-off button for the selected de-
vice. This can also be programmed as a “discrete” power
button.
3. Device power button
After you have configured your devices, press this button to
power on/off the selected device. This may be programmed
as a “discrete” power button.
4. Device direct-access buttons
These buttons function differently depending on the device
selected. Use them to change channels, raise and lower the
volume, and play or stop tapes, CDs, DVDs, VCDs, and
other recorded media. For more information, refer to page
15, Direct access buttons.
5. Menu button
Press the Menu button for three seconds to enter and exit the
Setup function. Refer to Chapter 4, Customizing the UCom-
mand-616, for details.
6. Enter/mute button
When the Main Menu is being configured, press this button
to confirm your changes. If the main menu is not being ac-
cessed, press this button to mute the audio output of your
device.
7. Beep alert speaker opening
Enables you to hear a beep when you press a button. You
can disable the beep from the Information (i) screen. Refer
to page 14, The Information screen.