Curtis DVD2100 DVD Recorder User Manual


 
1
1
1
2
13
13
3
2
2
3
3
4
5
6
7
8
9
9
9
11
11
1
2
3
9
11
12
10
25
The following charts are control bar menus for DVD, VCD, CD and MP3 respectively. Please note that the menu
may vary somewhat between different discs.
The meanings for the icons are as follows.
1. This icon shows the disc type.
2. MODE. Options include Normal Play, A-B
Repeat , Chapter Repeat , Title Repeat , Disc
Repeat, Program Play, etc.
3. TRICK. Options include Play, Stop, Pre-stop,
Pause, FF/FB, Slow, etc.
4. TITLE. The DVD title playing and the total
number of titles.
5. CHAPTER. The chapter of the DVD title
playing and the total number of chapters.
6. AUDIO. Select the DVD language.
7. SUBTITLE. Select the DVD subtitle.
8. ANGLE. Select the DVD shooting angle.
9. T-TIME. Displays the time played and left.
10. TRACK. Track being played of the VCD/CD
and the total number of tracks.
11. AUDIO. Channel selection when playing VCD,
CD and MP3.
12. PBC ON/OFF. Play menu control. This function
is available only for 2.0 and above versions.
13. File Type: Such as Audio rideo.
Operation
Direct Play
1. Press the OPEN/CLOSE button to open the
disc tray.
2. Insert the available disc.
3. Do not put the disc on the wrong side. The smooth side should face downward, while the printed side should
face upward.
Press the OPEN/CLOSE button to close the disc tray. The system will start playing.
Play a DVD
Play a VCD
DVD
MODE: Normal Normal
TRICK: Play A-B Repeat
TITLE: 01/01 Chapter Repeat
CHAPTER: 02/14 Title Repeat
AUDIO: 01/03-OTH Program
SUBTITLE: 01/03-OTH Random
ANGLE: 01/01
T-TIME: 00:02:04-00:51:25
VCD
MODE: Normal Normal
TRICK: Play A-B Repeat
Track: 01/01 Track Repeat
Audio: Stereo Disc Repeat
PBC: PBC ON Program
TR-TIME: 00:02:04-00:51:25 Random
Play a MP3
File play
File Type: AUDIO Normal
MODE: Normal A-B Repeat
TRICK: Playing Song Repeat
AUDIO: Stereo Disc Repeat
TIME: 00:02:48-00:51:25 Program
Random
Play a CD
CDDA PLAY
File Type: AUDIO Normal
MODE: Normal Play A-B Repeat
TRICK: Playing Song Repeat
AUDIO: Stereo Disc Repeat
TRACK 01/10 Program
TIME 00:02:48-00:51:25 Random
Play Mode
22
Introduction
The Disc Operation means something done to recordable discs in the drive, including browsing disc information,
finalizing a disc, removing disc content, deleting the last title, compatibility and write protection, etc.
Enter the Disc Operation Mode
When the system detects DVD+R or DVD+RW disc in the drive, press the DISC OPER button to enter
the mode.
Menu Description
The control bar menu under this mode is as shown in the chart.
The meanings for the icons are as follows.
1. Play: Play the content of the current disc.
2. Erase Disc: Once this operation is done, all content in the disc will
be removed completely. The disc index will appear as blank on the screen.
3. Rename Disc: Rename the disc (default name: MY DVD).
4. Record a new title: Add a new title to record.
5. Overwrite Disc: An operation on a recorded DVD+RW disc to
overwrite its previous content
6. Lock Disc:. This function prevents the deletion of recorded content.
7. Finalize disc: This function enables the DVD+RW disc to be played in other DVD players. Once the disc is
finalized, no further writing or change is allowed. (Such operation applies only to DVD+R discs)
Play
Rename Disc
Erase Disc
Record a New Title
Overwrite Disc
Finalize Disc
Lock Disc
Operation Steps
Erase Disc
This operation is effective for DVD+RW discs. In the Disc Operation
control bar menu, use the button to select the Erase Disc option,
press the SELECT button and a warning message pops up, This aperation
will erase all duta on the disc. Are you sure you want to continue .
Press the button to select Yes , and then press the SELECT button
to confirm. Then the system will start erasing the disc.
The Erase Disc operation may take some time. During the operation, do
not conduct any other operation, including standby; once the operation starts,
it cannot be cancelled midway. Never switch off the power during the
operation; otherwise the disc may be damaged.
Lock Disc
This operation will cancel the write protection of a locked disc. This
function is available only for DVD+RW discs.
1. In the Disc Operation control bar menu, use the button to select
the Lock Disc item, and then press the SELECT button.
To judge if a disc is write-protected, try the Browse Disc Information
operation. A write-protected disc cannot be recorded, erased or edited unless
the write pr1tection is canceled.
or
or
Play
Rename Disc
Erase Disc
Record a New Title
Overwrite Disc
Finalize Disc
Lock Disc
Play
Rename Disc
Erase Disc
Record a New Title
Overwrite Disc
Finalize Disc
Lock Disc
Disc Operation