Filter
Top Products
- 10 -
7- TV Operation
(1) Basic operation
Initial Setup Menu
NOTE: If this is the first time you turn on the LCD TV, the Initial Setup Menu will display.
Menu Language
Select the preferred language when viewing on screen menus. Use the ENTER/► to select language.
Tuning Band
Select Tuning Band mode. Press ENTER/► button to select Air/Cable STD/Cable HRC/Cable
IRC/Cable Auto.
Auto Channel Search
When using your LCD TV for the first time. Please scan for all available broadcasting channels in your
local area. Press ENTER/► button to enter the Auto Channel Search Program.
NOTE: Auto Channel Search for TV channels in your local area may take several minutes to
complete.
Choosing a TV channel
1. Press CH+/CH- button on the side panel or on the remote control.
Press CH+ button for the next channel
Press CH - button for the previous channel.
2. Press 0-9 buttons and
button.
You can select the channel by pressing 0 to 9 buttons and
button directly for the channel you
want.
Example:
To select 1-Analog channel (e.g. Channel 5): Press the 5, then press and 0 button.
To select 2- Analog channel (e.g. Channel 20): Press the 2 and 0 buttons , then press and 0
button.
To select 3- Analog channel (e.g. Channel 103): Press the 1 and 0 and 3 button, then press and
0 button.
To select a channel number for digital channel (e.g. Channel 2-1): Press the 2 button, then press
and 1 button, then press ENTER button.
Note: After select the digit button, the digit will be memorized.