Filter
Top Products
20
19
PICTURE ADJUSTMENT 1
MODE PICTURE
CUSTOM
Select this mode to view the adjusted picture you want.
Select this mode to view the factory-presetting standard picture.
Select this mode to view a powerful and clear picture.
- watch in the brighter(daylight) environments.
Select this mode to emphasize mildness
- When it is dark around to lessen the fatigue of eyes.
STANDARD
DYNAMIC
MILD
Press the TV MENU button. Move the
cursor to PICTURE by pressing the CH
/ buttons and press the VOL + or
button.
Move the cursor to PICTURE by
pressing the CH
/ buttons.
Press the VOL +/- or
button.
Whenever this button is pressed, the
mode will change as follows.
11
11
22
22
STANDARD DYNAMIC
PICTURE
PICTURE STANDARD
CONTRAST 75
BRIGHTNESS 50
SHARPNESS 50
COLOR 50
TINT 0
: MOVE : ADJ. : PREV.
PICTURE
PICTURE DYNAMIC
CONTRAST 100
BRIGHTNESS 50
SHARPNESS 75
COLOR 50
TINT 0
: MOVE : ADJ. : PREV.
33
33
USING ON-SCREEN MENU
You can sequentially select any one of the four possible preferred analogue picture presets.
CUSTOM MILD
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE ENGLISH
:
MOVE
:
SELECT
:
EXIT
CHANNEL MEMORY(SET UP)
FINE TUNE
If the reception is clear, you do not have to fine-tune the channel, as this is done automatically
during auto program and manual memory.
If however the signal is weak or distorted, you may have to fine-tune the channel manually.
1. Press CH
/ buttons or Press the 10-Digit keypad button to adjust a channel you want.
2. Press TV MENU button and move the cursor to "SET UP" option and press VOL + or
button, then the "SET UP" menu is displayed.
3. Press CH
/ buttons to place the cursor on the "FINE TUNE" option.
4. Use VOL +/- or
buttons until you obtain a sharp and clear picture and good sound quality.
5. If you wish to memorize adjusted FINE TUNE state, press "A/D" button, and then the memorie
icon is displayed.
If you wish to initialize it, press that button again, and then the icon disappear.
NOTES The memorized channel does not operate AFT(automatic frequency tuning)mode.
The FINE-TUNE is operated only selected channel.
After the "AUTO PROGRAM", the memorized channel operate AFT(automatic
frequency tuning)mode automatically.
SET UP
ANTENNA CATV 2
AUTO PROGRAM
FINE TUNE 0
A/D:MEMORY
:MOVE : ADJ. :
PREV.
SET UP
ANTENNA CATV 2
AUTO PROGRAM
FINE TUNE +1
A/D:MEMORY
:MOVE : ADJ. :
PREV.
SET UP
ANTENNA CATV 2
AUTO PROGRAM
FINE TUNE 0
: MOVE : SELECT. :PREV.
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE ENGLISH
: MOVE : SELECT : EXIT