Filter
Top Products
8
ANTENNA CONNECTION
Antenna
The antenna requirements for a good color television reception are more important than those
for black & white television reception. For this reason,a good quality of outdoor antenna is
strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor antenna.
A : Using a VHF/UHF combination outdoor antenna.
B : Using separate VHF and/or UHF outdoor antenna.
Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear
of the TV set.
1. A 75 ohm system is generally a round cable
with F-type connector that can easily be
attached to a terminal without tools.
2. A 300 ohm system is a flat "twin-lead" cable
that can be attached to a 75 ohm terminal
through a 300-75 ohm ADAPTOR.
(Refer to 300-75 ohm ADAPTOR as supplied)
300-ohm twin-lead cable (flat)
VHF/UHF ANTENNA
A. Combination VHF/UHF Antennas
B. Separated VHF/UHF Antennas
VHF ANTENNA UHF ANTENNA
300/75-ohm
ADAPTOR
(as supplied)
300-ohm
twin-lead
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm
coaxial cable
75-ohm coaxial cable
ANT/
CABLE
75Ω
ANT/
CABLE
75Ω
or
IN OUT
VHF/UHF ANTENNA
COMBINER
(not supplied)
REAR OF TV
REAR OF TV
75-ohm coaxial cable (round)
F-type connector
or
7
CONNECTING EXTERNAL EQUIPMENT
To connect a home VCR to the receiver, connect the coaxial cable from the RF OUT
socket of the VCR to the antenna socket of the TV SET, and connect the antenna lead-in
cable to the RF IN socket of the recorder.
VCR OPERATION BY USING THE RF OUT
ANTENNA To "RF IN"
To antenna socket
To "RF OUT"
Coaxial cable
EARPHONES
The earphones must have an impedance of between 8 and 32 ohms and have a 3.5mm
stereo jack plug.
1. Plug the earphone jack into the earphone socket on the right hand side of the TV.
2. Adjust the volume of sound using VOL-,+ buttons.
NOTE : If earphone is inserted there will be no sound output at the loud speaker.