Filter
Top Products
1919
CONNECTIONS
Connections
1
Connect the DVB-T VCR/DVD Recorder’s
DIGITAL AUDIO OUT jack (Coaxial) to the
corresponding in jack on your amplifier. Use an
optional digital coaxial audio cable. (X)
2
You need to activate the DVB-T VCR/DVD
Recorder’s digital output; see ‘Digital Audio’
Settings on page 31.
Digital Multi-Channel Sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
audio/video receiver that supports one or more of
the audio formats provided by your DVB-T VCR/DVD
Recorder (MPEG 2, Dolby Digital, and DTS). Check
the receiver manual and the logos on the front of
the receiver.
• Due to the DTS Licensing agreement, the
digital output will be in DTS digital out when
the DTS audio stream is selected.
• If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
• 5.1 channel digital surround sound via the
digital connection can only be obtained if your
receiver is equipped with a digital multi-
channel decoder.
• To see the audio format of the current DVD on
the on-screen display, press [AUDIO].
Rear of DVB-T VCR/DVD Recorder
Amplifier (Receiver)
Connecting an Amplifier/Receiver
Connecting to an amplifier equipped with two channel
analogue stereo or Dolby Pro Logic ll/Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
DVB-T VCR/DVD Recorder to the left and right audio
in jacks on your amplifier, receiver, or stereo
system, using the audio cables (A) (Audio cables are
not supplied with this product).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/Video
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
The DVB-T VCR/DVD Recorder does not perform
internal (2- channel) decoding of DTS sound tracks.
To enjoy DTS multi-channel surround, you must
connect the DVB-T VCR/DVD Recorder to a DTS
compatible receiver via one of the DVB-T VCR/DVD
Recorder’s digital audio outputs.
To receive audio/video signals from other
equipment, connect the AVF (Audio/Video Front)
jacks on the DVB-T VCR/DVD Recorder to the
audio/video out jacks on your external component,
using optional audio/video cables.
Connecting Optional Equipment
Front of DVB-T VCR/DVD Recorder
Jack Panel of Accessory Component
(VCR, Analogue Camcorder, etc.)
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ `19