Filter
Top Products
13
1.Press “MENU” button.
•The main menu will appear.
2.Select “Setup”.
•Move the cursor to the “Setup
” menu by using
“VOLUMEC/B” buttons.
•Select “Setup” sub-menu by using “CHANNELx
”
button.
3.Select Auto Program by using “
CHANNEL
xx
/
yy
” buttons.
•The following picture will appear on the screen
•Use “CHANNELx/y” buttons to select Auto
Program.
LActual broadcasting channels can be
set up in the “Memory” of the TV set
through this function.
With an automatic channel setup
memory, desired channels can be
selected easily with “CHANNELx/y”
buttons. Such inconvenience as
pressing channel numbers one by
one is not necessary.
LMENU mode automatically
disappears in 20 seconds when
there is no button operation. If you
want to get out of the Menu mode
yourself, press “MENU” button
several times.
LWhen setting up an automatic
channel memory, only the channels
with a signal get memorized. The
other channels go into erased status.
LWhen a TV program is on the signal,
“Air” appears on the screen; while
CATV program is on the signal,
“Cable TV” appears on the screen.
Select the desired Source by using
“VOLUMEC/B” buttons to set up the
Automatic Channel Memory.
Automatic Memory of Channel
Move Sel. Exit
Picture
Move Sel. Exit
Set Up
Air/Cable Air
Auto Program (
Ch Edit
Set Up
Move Sel. Prev.