Filter
Top Products
30 Using the TV Menu
www.dell.com | support.dell.com
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
Setup
Setup
allows you to adjust the appearance of the
TV Menu
, preset viewable cable channels, change
the language of the
TV Menu
(see "
Selecting Your TV Menu Language
" on page 24), and to
restore factory settings.
In the
TV Menu Settings
menu, use
TV Menu
Hold Time
to increase or decrease the amount
of time the TV Menu appears.The maximum
amount of time is 60 seconds.
You can select
TV Button lock
to lock the
buttons on the bottom panel. When this option
is enabled, only the power button functions.
Hold the volume up and the channel up
buttons together for 10 seconds to unlock the
buttons.
Channel Setup
allows you adjust the settings
for individual channels and preset the viewable
channels. Select
Antenna/Cable
to select the
antenna or cable connected to your TV.
If you are using the
Digital TV
input source, you can preset the viewable channels. Select
Channel
Search
to search the viewable channels. While searching the channels, press the
Menu
or
OK
button on the remote control to stop the searching. Select
Channel Edit
to edit the channels. If
the signal is weak or distorted, select
Fine Tuning
to fine-tune the channel manually.
If you are using the
TV IN
connector, you need to preset the viewable channels for the
Digital TV
input source.
Timer Settings
allows you to set the time which the TV turns on and off automatically.
Select
Closed Caption
to turn on and off closed captioning and set several other CC options.
W3202_3706MH_DAO_PROOF.book Page 30 Friday, October 7, 2005 2:26 PM