Filter
Top Products
32 Troubleshooting Your TV
www.dell.com | support.dell.com
General Problems
Problem Possible Solution
Poor picture quality while watching TV
and using a device such as a DVD
player or a VCR
1
Check the aspect ratio settings in the TV Menu. Press the
Menu
button and select
Size
. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
2
Connect the device using a different connector. For example, if
you are experiencing the problem using a composite connector,
try using the component connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 24 for more information.
3
Reset the original factory defaults. Press
Menu
button, select
Setup
, and then select
Factory Reset
.
4
Adjust the color temperature. Press
Menu
button, select
Picture
Settings
, and then select
Color Temperature
.
NOTE: Some set top boxes offer aspect ratio. See your device
documentation for more information.
Poor picture quality when using a
device connected to the TV IN
(coaxial) connector
1
Ensure
TV
is selected as the input source in the
Input Select
menu. See "Input Select" on page 24 for more information.
2
Press
Menu
buttton, select
Setup
, and then select
Channel
Setup
. This resets the channels on your TV.
3
Check the aspect ratio settings in the TV Menu. Press the
Menu
button and select
Size
. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
4
Reset the original factory defaults. Press
Menu
button, select
Setup
, and then select
Factory Reset
.
5
Adjust the color temperature. Press
Menu
button, select
Picture
Settings
, and then select
Color Temperature
.
6
The problem may be with your device, contact your service
provider.
W3202_3706MH_DAO_PROOF.book Page 32 Friday, October 7, 2005 2:26 PM