Dell W1900 Flat Panel Television User Manual


 
Setting Up Your TV Display 17
Using the VGA Connector
NOTE: Only one connector can be used for a computer, either VGA or DVI.
1
Turn off the TV display and unplug the power cord.
2
Connect the blue VGA cable to your TV display and to your computer.
3
Connect the green audio cable to the connector on the TV display and to your computer.
4
Plug in the power cords for the TV display and devices and turn them on.
5
Enter the OSD and select the
VGA
. For additional information about the Input Select menu,
see page 24.