Filter
Top Products
30 Using the On-Screen Display
www.dell.com | support.dell.com
FILE LOCATION: D:\Dell_DAO_W1900_OM_final\W1701_19000S\W1701_1900e40.fm
DELL CONFIDENTIAL – PRELIMINARY 11/22/04 – FOR PROOF ONLY
Setting Your Cable Channels
Your TV is set to automatically detect whether you are using an antenna or cable and then set the
available channels. Some cable providers use an older cable standard that the TV can not
automatically detect. If you have your TV connected but can only view channels 5 and 6, complete
the following steps:
1
Press the Menu button the remote control or TV and enter the on-screen display (OSD).
2
Select
Setup
and then select
Channel Setup.
3
In
Channel Setup
, select
Antenna/Cable
, and then toggle to
Cable
.
4
If selecting
Cable
does not resolve the issue, repeat steps 1 through step 3 using each available
Channel Setup
option (
HRC, IRC,
and
Antenna)
until you can view all channels.