Filter
Top Products
ENGLISH
42
When “4. AUDIO SETUP” is selected
1
2
3
See page 35.
Use the
•
and
ª
cursor buttons to select the desired
setting, then press the ENTER button.
1. DIGITAL OUT
Use this to select the digital output’s signal
format.
2. LPCM SELECT (96 kHz
/
48 kHz)
Use this to set the digital audio output when
playing DVDs recorded in linear PCM audio.
✽
To exit the audio setup mode
Use the
•
and
ª
cursor buttons to select “MAIN
PAGE”, then press the ENTER button.
Press RETURN button, you can go back to the
previous screen.
• The screen returns to as it was in step 1.
1
2
3
4
5
6
7
8
9
0
+10
CLEAR
ENTER
CALL
RANDOM
REPEAT
A-B REPEAT
NTSC/PAL
RETURN
ANGLE
AUDIO
MENU
SUBTITLETOP MENU
SET UP
V.S.S.
PROG/DIRECT
SKIP
+
-
SLOW/SEARCH
+
-
1
2, 3, 4
3, 4
2, 3, 4
B
1. DI GI TAL OUT
( 96 kHz --> 48kHz)
2. LPCM SEL ECT
NORMAL
OFF
> MAIN PAGE
DEC ISION:ENTER BUTTON
DIGITAL OUT
SELECT :
AUDIO SETUP
Remote control unit
Remote control unit
ENTER
4
t
When “PROGRESSIVE MODE” is selected:
MODE 1 (level detection mode)
(Factory default)
This is a mode for high precision detection of the
source type from the level of the video signals
recorded on the DVD.
For DVDs on which the flag (identification signal)
data is recorded incorrectly, the picture quality
may decrease when flag detection is conducted.
This mode is effective in such cases.
MODE 2 (flag detection mode)
This is a mode for detecting the source type
from the source flag (identification signal)
recorded on the DVD.
In dark scenes, distinguishing between video
signals and noise signals with level detection is
difficult and the picture quality may decrease.
This mode is effective in such cases.
B
DEC ISION:ENTER BUTTON
VIDEO MODE--> V IDEO
SELECT :
PROGRESSIVE MODE
5.
PROGRESSIVE MODE
> V IDEO SETUP
> MAIN PAGE
MODE 1
MODE 2
Remote control unit
Remote control unit
ENTER