Filter
Top Products
9
ENGLISH
4
CONNECTIONS
• Read the manuals of all the components when making
connections.
• Keep the power cord unplugged until all connections have
been completed.
• If the power is on when connections are made, noise may
be generated and damage the speakers.
• Be sure to connect the left and right channels properly, L
(left) to L, R (right) to R.
• Plug the power cord securely into the power outlet.
Incomplete connection may result in noise.
• Binding the power cord together with connection cords may
result in humming or noise.
NOTES:
(1) Connecting to a TV
• Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DVD-2800’s VIDEO OUT
or S-VIDEO OUT and AUDIO OUT.
DVD-2800
L
R
Y
PB/CB
PR/CR
OPTICAL COAXIAL
VIDEO
OUT
AC IN
COMPONENT
VIDEOOUT
S-VIDEO
OUT
DIGITAL OUT
(PCM/BITSTREAM)
AUDIO
OUT
VIDEO IN S-VIDEO IN
AUDIO IN
L
R
TV
S-Video output connector
The video signals are divided into color (C) and brightness
(Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input connector, we
recommend connecting it to the DVD-2800’s S-Video
output connector using a commercially available S-Video
connection cord.
To power outlet
• Connect the DVD-2800’s video outputs to the TV either
directly or through an AV amplifier. Do not connect it via a
VCR (video cassette recorder). Some discs contain copy
prohibit signals. If such discs are played via a VCR, the copy
prohibit system may cause disturbance in the picture.
• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to
comply with your TV’s video format. When the TV is NTSC
formated set to NTSC. (See page 41)
NOTES: