Filter
Top Products
34
ENGLISH
B
When “MULTI CHANNEL” is selected, use the
•
and
ª
cursor
buttons to select the item to be set, then press the ENTER button.
SPEAKER CONFIGURATION
Use this to select the types of the different speakers.
CHANNEL LEVEL
Use this to adjust the output level of the different speakers.
DELAY TIME
Use this to set the distance from the different speakers to the
listening position.
✽
To exit the SPEAKER SETUP mode
Use the
ª
cursor button to select “AUDIO SETUP” then press
ENTER button.
✽
The SPEAKER CONFIGURATION settings only apply to analog
outputs.
B
When “SPEAKER CONFIGURATION” is selected, use the
•
and
ª
cursor buttons to select the speaker to be set then press the ENTER
button.
• The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the
•
and
ª
cursor buttons to select the speaker type, then press the ENTER
button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
NONE
Select this when no speaker is connected.
YES
Select this when a subwoofer is connected.
NO
Select this when no subwoofer is connected.
• When “CROSSOVER” is selected.
40 Hz, 60 Hz, 80 Hz (Factory default), 100 Hz, 120 Hz, set the
frequency of crossover.
✽
Press the RETURN button to return to the “SPEAKER SETUP”
menu.
B
When “CHANNEL LEVEL” is selected, use the
•
and
ª
cursor
buttons to select the speaker to be adjusted, then use the
0
and
1
cursor buttons to set the level.
TEST TONE
• Use the
0
and
1
cursor buttons to select auto or manual.
Adjust so that the volume of the test tones output from the
different speakers sounds the same.
• The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and -10 dB in steps
of 1 dB.
• Settings SW + 10 dB to “ON” increases by 10 dB the volume
level that is output from the sub woofer.
✽
Press the RETURN button to return to the “SPEAKER SETUP”
menu.
SPEAKER SETUP
SELECT: DECISION:ENTER BUTTON
SPEAKER CONF IGURAT ION
CHANNEL L EVEL
DELAY T I
M
E
AUDIO SETUP
SPEAKER SETUP
SELECT: DECISION:ENTER BUTTON
SPEAKER CONF IGURAT ION
FRONT SP
CENTER SP
SUB
W
OOFER
SURROUND SP
CROSSOVER
LARGE
S
M
ALL
SPEAKER SETUP
SELECT: DECISION:ENTER BUTTON
CHANNEL L EVEL
TEST TONE
FRONT Lch
CENTER
FRONT Rch
OFF
0dB
0dB
0dB
0dB
0dB
0dB
SURROUND Rch
SURROUND L ch
SUB
W
OOFER
OFF
S
W + 1 0
d
B
Remote control unit
ENTER
Remote control unit
Remote control unit
3